home *** CD-ROM | disk | FTP | other *** search
/ Night Owl 9 / Night Owl CD-ROM (NOPV9) (Night Owl Publisher) (1993).ISO / 050a / sedit100.zip / SEHELP.HLP < prev    next >
Text File  |  1993-03-11  |  62KB  |  2,305 lines

  1. *-2x=9,-
  2. HELP INDEX
  3. !Use the arrow keys to highlight the desired
  4. ! topic, and then press (ENTER).
  5. ────────────────────────────────────────────────────────────────────
  6. /?/
  7. 0-/
  8. 9
  9. Welcome
  10. 1-/
  11. 10
  12. Support
  13. 2-
  14. 6
  15. Hot-Keys
  16. 3-
  17. 11
  18. Mouse
  19. 08
  20. 2
  21. Help
  22. 18
  23. 13
  24. Key Commands
  25. 28
  26. 91
  27. Box Codes
  28. 38
  29. 3
  30. Field Editing
  31. 0H
  32. 7
  33. License
  34. 1H
  35. 27
  36. DOS Shell
  37. 2H
  38. 87
  39. Setup
  40. 3H
  41. 90
  42. Limits
  43. 0V
  44. 92
  45. ASCII Chart
  46. 1V
  47. 14
  48. Movement
  49. 2V
  50. 15
  51. CTRL-K
  52. 3V
  53. 16
  54. CTRL-Q
  55. 0f
  56. 17
  57. Other Keys
  58. 1f
  59. 18
  60. Definable
  61. 2f
  62. 83
  63. Info
  64. 3f
  65. 12
  66. Kudos
  67. *--xA9,,
  68. HELP
  69. This program contains an on-line, context sensitive help system.  At
  70. any time, you can view a help screen relating to your position in
  71. the program by pressing (F1).  Presented below is a summary of the
  72. valid commands while in the help window.
  73. ────────────────────────────────────────────────────────────────────
  74. (ARROW KEYS) Select a topic by moving the highlight bar with
  75.              any of the arrow keys.
  76. (ANY LETTER) Jump to the next selection beginning with that letter.
  77. ────────────────────────────────────────────────────────────────────
  78. (HOME) Move the highlight bar to the first selection.
  79.  (END) Move the highlight bar to the last selection.
  80. (PGUP) Move the highlight bar 1/10 back in the list.
  81. (PGDN) Move the highlight bar 1/10 forward in the list.
  82. ────────────────────────────────────────────────────────────────────
  83. (ESC) or (-) Leave the help system and return to program.
  84. ────────────────────────────────────────────────────────────────────
  85. /,,
  86. <-,
  87. 1
  88. INDEX
  89. *-.xA9,,
  90. FIELD EDITING pg. 1 of 3
  91. When entering certain text information, such as a search key, you
  92. may use the following field editing commands.
  93. ────────────────────────────────────────────────────────────────────
  94.      (HOME)  Moves the cursor to the beginning of the line.
  95.       (END)  Moves the cursor to the end of the line.
  96. ────────────────────────────────────────────────────────────────────
  97.         ()  Moves the cursor one space to the left.
  98.         ()  Moves the cursor one space to the right.
  99.    (CTRL-)  Moves the cursor one word to the left.
  100.    (CTRL-)  Moves the cursor one word to the right.
  101. ────────────────────────────────────────────────────────────────────
  102.       (DEL)  Deletes one character at the cursor.
  103. (BACKSPACE)  Moves the cursor one space to the left and deletes
  104.              one character.
  105. ────────────────────────────────────────────────────────────────────
  106. /-,
  107. ;-,
  108. 4
  109. More...
  110. ;7,
  111. 1
  112. INDEX
  113. *--xB9,,
  114. FIELD EDITING pg. 2 of 3
  115.   (INS)  Toggles between the insert and over-type mode.  While in
  116.          the insert mode the cursor's height will increase and new
  117.          characters are inserted by shifting all remaining text one
  118.          position to the right of the cursor.  Toggling back to the
  119.          over-type mode will restore the cursor to its normal size
  120.          and characters entered will replace those at the cursor.
  121. ────────────────────────────────────────────────────────────────────
  122.    (F5)  Converts all the text to upper case.
  123.    (F6)  Converts all the text to lower case.
  124.    (F7)  Makes the first letter of each word upper case.
  125.    (F8)  Reverses the character's case at the cursor.
  126. ────────────────────────────────────────────────────────────────────
  127.  (PGUP)  Enter control character (i.e. ALT-027, ALT-007, etc.)
  128.  (PGDN)  Reverse all changes and continue editing.
  129.   (ESC)  Reverse all changes and quit.
  130. (ENTER)  Accept all changes and quit.
  131. ────────────────────────────────────────────────────────────────────
  132. /.,
  133. =-,
  134. 5
  135. More...
  136. =7,
  137. 3
  138. Previous...
  139. =E,
  140. 1
  141. INDEX
  142. *-2x=9,,
  143. FIELD EDITING pg. 3 of 3
  144. In some instances, the input line will appear with text already in
  145. it.  This is either the default or the last entered text.  Pressing
  146. any character will erase the line and allow you to enter new text.
  147. However, you may choose to edit the text by first pressing a control
  148. key.  A control key is any valid non-alphanumeric key such as (INS)
  149. or ().
  150. ────────────────────────────────────────────────────────────────────
  151. /-,
  152. 3-,
  153. 4
  154. Previous...
  155. 3;,
  156. 1
  157. INDEX
  158. *-1x>9,,
  159. HOT-KEYS
  160. There are certain key combinations that are available to you anytime
  161. SEDIT is waiting on a key to be pressed.  These are called HOT-KEYS.
  162. ────────────────────────────────────────────────────────────────────
  163. Valid Hot-Keys (default):
  164.  
  165.               (F1)  Context sensitive help.
  166.            (ALT-M)  Available memory and other key information.
  167.            (ALT-S)  Shell to DOS, return to SEDIT by typing EXIT.
  168. ────────────────────────────────────────────────────────────────────
  169. //,
  170. 5-,
  171. 1
  172. INDEX
  173. 1:,
  174. 2
  175. (F1)
  176. 27,
  177. 83
  178. (ALT-M)
  179. 37
  180. 27
  181. (ALT-S)
  182. *-.xA9,,
  183. LICENSE AGREEMENT pg. 1 of 2
  184. SEDIT (the software) is licensed to you.  The author, J.E. Smith,
  185. retains sole ownership of the software.
  186.  
  187. You may try the shareware version for no more than 30 days, after
  188. which you must either register it or quit using the program.
  189. Registered users may only use the software on one computer at a
  190. time.  At no time should more than one copy of software be running
  191. on different computers at the same time.
  192.  
  193. Registered users are permitted to make a backup copy of the
  194. CONFIG.SE file for their own use in case the original disk becomes
  195. defective.  All other copies of this file are prohibited.  The
  196. CONFIG.SE file should not be loaned, given away or otherwise used by
  197. anyone other than the licensee.
  198. ────────────────────────────────────────────────────────────────────
  199. /-,
  200. ;-,
  201. 8
  202. More...
  203. ;7,
  204. 1
  205. INDEX
  206. *--xB9,,
  207. LICENSE AGREEMENT pg. 2 of 2
  208. You may NOT alter, decompile or disassemble the software or any of
  209. the supporting files other than what occurs during the natural use
  210. of the program.
  211.  
  212. You may NOT assign, sublicense, or transfer the program or any
  213. rights under this License to anyone else.  This License Agreement is
  214. NOT transferable, and can only be revoked by the user if he or she
  215. destroys ALL copies of the program.
  216. ────────────────────────────────────────────────────────────────────
  217. DISCLAIMER OF ALL WARRANTIES AND LIABILITY
  218.  
  219. SEDIT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
  220. EXPRESSED OR IMPLIED.  YOU ASSUME THE ENTIRE RISK OF USING THE
  221. PRODUCT.  THE AUTHOR WILL NOT BE LIABLE FOR, BUT NOT LIMITED TO,
  222. DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
  223. FROM ANY DEFECT IN, OR USE OF, THE SOFTWARE.
  224. ────────────────────────────────────────────────────────────────────
  225. /-,
  226. =-,
  227. 7
  228. Previous...
  229. =;,
  230. 1
  231. INDEX
  232. *--xB9,,
  233. WELCOME
  234. Welcome to SEDIT!  SEDIT is a text editor originally designed to
  235. compose and edit messages while using an offline mail reader such as
  236. SPEED READ.  However, its use is not limited to just offline mail.
  237. It provides all the features needed to create small to medium size
  238. text documents.
  239. ────────────────────────────────────────────────────────────────────
  240. Major features included are multi-file editing (up to 4 files),
  241. search and replace, block commands (copy, move, etc.), printing,
  242. keyboard macros, user-defined wordwrap, paragraph reformating and a
  243. spelling checker with a 50,000 word dictionary.
  244. ────────────────────────────────────────────────────────────────────
  245. SEDIT was designed with ease of use in mind.  Most commands are
  246. available via pull-down menus.  An extensive, on-line,
  247. context-sensitive, hyper-text, help system is always available by
  248. pressing (F1).  A lot of thought and time went into SEDIT, I hope
  249. you find it as useful as I do.
  250. ────────────────────────────────────────────────────────────────────
  251. /-,
  252. =-,
  253. 90
  254. Limits
  255. =6
  256. 1
  257. INDEX
  258. *-.x@9,,
  259. TECHNICAL SUPPORT
  260. Questions or comments about this product, or any of my other
  261. products, should be directed to:
  262.  
  263.       Jim E. Smith                        Channel 8250
  264.   344 Observatory Drive        or     SPEED Conference #25
  265.   Birmingham, AL  35206                   205-744-8546
  266.  
  267. I also monitor several national networks such as ILink, U'NI Net,
  268. etc.  You may leave me mail, addressed to JIM SMITH, in the
  269. Shareware Conference of any of these networks.
  270.  
  271. In addition to the above, registered users are provided with my home
  272. phone number for immediate technical support.
  273. ────────────────────────────────────────────────────────────────────
  274. /,,
  275. :-,
  276. 1
  277. INDEX
  278. *-4x;9,,
  279. MOUSE SUPPORT
  280. Mouse Support was deferred until a later version, so that it can be
  281. properly implemented.
  282. ────────────────────────────────────────────────────────────────────
  283. /,,
  284. /-,
  285. 1
  286. INDEX
  287. *-.xA9,,
  288. KUDOS AND MANY THANKS
  289. First, I would like to thank all the people who have registered
  290. SEDIT.  If you had not done so, SEDIT would have ceased to exist.  I
  291. would like to give a special thanks to the registered users who
  292. chose to help beta test the latest version of SEDIT.
  293. ────────────────────────────────────────────────────────────────────
  294. I would like to also recognize the Sysops of Channel 8250, RANDY
  295. HILLIARD and MIKE TYNER; the Sysop of the Lunatic Fringe JOHN
  296. STEWART; and the Sysops of The Matrix ROCKY RAWLINS and ERIC HUNT.
  297. They have willingly given of their time, energies and system
  298. resources, to provide SEDIT a distribution site.  Thanks!
  299. ────────────────────────────────────────────────────────────────────
  300. SEDIT's original beta team was made up of several registered SPEED
  301. READ users.  Though too numerous to list, each of these people have
  302. earned a special heartfelt thanks.
  303. ────────────────────────────────────────────────────────────────────
  304. /,,
  305. ;-,
  306. 1
  307. INDEX
  308. *-0x?9,,
  309. KEY COMMANDS
  310. Some commands have a static or hard-coded keystroke associated with
  311. it.  These keystrokes cannot be changed via the configuration
  312. program.  Generally, these are common default keystrokes for most
  313. editors and most also have a user-definable keystroke associated
  314. with it.  See MOVEMENT, CTRL-K, CTRL-Q and OTHER KEYS.
  315. ────────────────────────────────────────────────────────────────────
  316. Most commands allow you define or assign a key to that particular
  317. function.  Since the keystrokes are subject to change the online
  318. help and the manual will only refer to them by function and default
  319. keystroke.  See DEFINABLE KEYS.
  320. ────────────────────────────────────────────────────────────────────
  321. /2,
  322. 7-,
  323. 92
  324. ASCII Chart
  325. 7;
  326. 1
  327. INDEX
  328. 0:
  329. 14
  330. MOVEMENT
  331. 0D
  332. 15
  333. CTRL-K
  334. 0L
  335. 16
  336. CTRL-Q
  337. 0W
  338. 17
  339. OTHER KEYS
  340. 5<
  341. 18
  342. DEFINABLE KEYS
  343. *-/x@9,,
  344. MOVEMENT
  345. The following keys are used to move within a text file.  These keys
  346. are not user-definable.
  347. ────────────────────────────────────────────────────────────────────
  348.            (/) Move one space to the left/right.
  349.       (CTRL-/) Move one word to the left/right.
  350.            (/) Move to previous/next line.
  351.       (HOME/END) Move to the beginning/end of current line.
  352.  (CTRL-HOME/END) Move to first/last line of displayed screen.
  353.      (PGUP/PGDN) Previous/next screen.
  354. (CTRL-PGUP/PGDN) First/last screen and line.
  355.          (ENTER) Move to beginning of the next line.
  356.            (TAB) Jump predefined number of spaces.
  357. ────────────────────────────────────────────────────────────────────
  358. /-,
  359. 9-,
  360. 13
  361. Key Commands
  362. 9<
  363. 1
  364. INDEX
  365. *--xA9,,
  366. CTRL-K
  367. The CTRL-K commands are primarily block commands.  They closely
  368. follow the industry standard.  These keys are not user-definable.
  369. ────────────────────────────────────────────────────────────────────
  370. (CTRL-K B) Mark beginning of block. │ (CTRL-K H) Hide/unhide block.
  371. (CTRL-K K) Mark end of block.       │ (CTRL-K G) Goto beg. of block.
  372. ────────────────────────────────────────────────────────────────────
  373. (CTRL-K Y) Delete block.        │ (CTRL-K S) Save file.
  374. (CTRL-K C) Copy block.          │ (CTRL-K R) Read block.
  375. (CTRL-K V) Move block.          │ (CTRL-K W) Write block.
  376. ────────────────────────────────────────────────────────────────────
  377. (CTRL-K A) Print all.           │ (CTRL-K M) Set lines per page.
  378. (CTRL-K P) Print block.         │ (CTRL-K L) Set left print margin.
  379. ────────────────────────────────────────────────────────────────────
  380. (CTRL-K T) Copy block to clipboard.   │ (CTRL-K 1..0) Set bookmark.
  381. (CTRL-K F) Copy block from clipboard. │ (CTRL-Q 1..0) Goto bookmark.
  382. ────────────────────────────────────────────────────────────────────
  383. /-,
  384. <-,
  385. 13
  386. Key Commands
  387. <<
  388. 1
  389. INDEX
  390. *-1x=9,,
  391. CTRL-Q
  392. The CTRL-Q commands are primarily control commands.  They closely
  393. follow the industry standard.  These keys are not user-definable.
  394. ────────────────────────────────────────────────────────────────────
  395. (CTRL-Q C) Enter Control Code.   │ (CTRL-Q F) Find string.
  396. (CTRL-Q L) Restore line.         │ (CTRL-Q A) Find and replace.
  397. (CTRL-Q Y) Clear to end of line. │ (CTRL-K 1..0) Set bookmark.
  398.                                  │ (CTRL-Q 1..0) Goto bookmark.
  399. ────────────────────────────────────────────────────────────────────
  400. /-,
  401. 4-,
  402. 13
  403. Key Commands
  404. 4<
  405. 1
  406. INDEX
  407. *-2x=9,,
  408. OTHER KEYS
  409. Below is a list of other keys that are not user-definable.
  410. ────────────────────────────────────────────────────────────────────
  411.             (INS) Toggle Insert/Overwrite mode.
  412.             (DEL) Delete character at cursor.
  413.       (BACKSPACE) Delete previous character and backup 1 column.
  414.  (ALT-1 to ALT-4) Jump to window number 1 to 4.
  415. ────────────────────────────────────────────────────────────────────
  416. /-,
  417. 3-,
  418. 13
  419. Key Commands
  420. 3<
  421. 1
  422. INDEX
  423. *--xB9,-
  424. USER DEFINABLE KEYS
  425. !Use the arrow keys to highlight the desired
  426. !function, and then press (ENTER).
  427. ────────────────────────────────────────────────────────────────────
  428. /k;
  429. /-;
  430. 19
  431.   --File--
  432. 0-
  433. 20
  434. Save File
  435. 1-
  436. 21
  437. Save All
  438. 2-
  439. 22
  440. Load New
  441. 3-
  442. 23
  443. Close File
  444. 4-
  445. 24
  446. Import
  447. 5-
  448. 25
  449. Export
  450. 6-
  451. 26
  452. Rename
  453. 7-
  454. 27
  455. DOS Shell
  456. 8-
  457. 28
  458. Quit
  459. 9-
  460. 29
  461.   --EDIT--
  462. :-
  463. 30
  464. Restore Line
  465. ;-
  466. 31
  467. Erase EOL
  468. <-
  469. 32
  470. Delete Line
  471. =-
  472. 33
  473. Undelete Line
  474. >-
  475. 37
  476. Delete Word
  477. /?
  478. 34
  479. Insert Line
  480. 0?
  481. 36
  482. Expand TABs
  483. 1?
  484. 35
  485. Control Code
  486. 2?
  487. 38
  488. Reformat
  489. 3?
  490. 40
  491.   --Window--
  492. 4?
  493. 41
  494. Zoom/unzoom
  495. 5?
  496. 42
  497. Next Window
  498. 6?
  499. 43
  500. Toggle Split
  501. 7?
  502. 44
  503. Resize
  504. 8?
  505. 45
  506.   --Locate--
  507. 9?
  508. 46
  509. Find
  510. :?
  511. 47
  512. Replace
  513. ;?
  514. 48
  515. Next Match
  516. <?
  517. 49
  518. Goto Line
  519. =?
  520. 50
  521.   --Block--
  522. >?
  523. 51
  524. Mark Beg.
  525. /P
  526. 52
  527. Reset Beg.
  528. 0P
  529. 53
  530. Mark End
  531. 1P
  532. 54
  533. Copy
  534. 2P
  535. 55
  536. Move
  537. 3P
  538. 56
  539. Delete
  540. 4P
  541. 57
  542. Goto Beg.
  543. 5P
  544. 58
  545. Hide/unhide
  546. 6P
  547. 59
  548. To Clipboard
  549. 7P
  550. 60
  551. From Clipbd.
  552. 8P
  553. 61
  554.   --Prt--
  555. 9P
  556. 62
  557. Print Block
  558. :P
  559. 63
  560. Print All
  561. ;P
  562. 64
  563. Form Feed
  564. <P
  565. 65
  566. Left Margin
  567. =P
  568. 66
  569. Line/page
  570. >P
  571. 67
  572. Page Break
  573. /a
  574. 68
  575.   --Macro--
  576. 0a
  577. 68
  578. Keyboard Macros
  579. 1a
  580. 71
  581.   --Spell--
  582. 2a
  583. 72
  584. Check to EOF
  585. 3a
  586. 73
  587. Check Word
  588. 4a
  589. 74
  590. Spell Check
  591. 5a
  592. 75
  593.   --Other--
  594. 6a
  595. 76
  596. Autoindent
  597. 7a
  598. 77
  599. Strip Spaces
  600. 8a
  601. 78
  602. Insert
  603. 9a
  604. 79
  605. Word Wrap
  606. :a
  607. 80
  608. TAB Size
  609. ;a
  610. 81
  611. Swapping
  612. <a
  613. 82
  614. DOS Command
  615. =a
  616. 83
  617. Memory
  618. >a
  619. 84
  620. Save Settings
  621. *--xB9,,
  622. FILE MENU
  623. The pull-down File menu is accessed by pressing (ALT-F, by default).
  624. It provides easy access to most of the disk/file related functions
  625. in SEDIT.  The following functions are supported via the menu.
  626. ────────────────────────────────────────────────────────────────────
  627.  Save File    -  Save active file.
  628.  Save All     -  Prompt and save all files.
  629.  Load New     -  Load a new file.
  630.  Close File   -  Close active file.
  631.  Import       -  Import another file into the active file.
  632.  Export       -  Export the marked block of text to a file.
  633.  Rename       -  Rename the active.
  634.  DOS Shell    -  Temporarily shell to DOS, Type EXIT to return.
  635.  Quit         -  Close all files and exit SEDIT.
  636. ────────────────────────────────────────────────────────────────────
  637. Functions with a key combination displayed can be directly accessed
  638. via the key combination without using the pull-down menu.
  639. ────────────────────────────────────────────────────────────────────
  640. /6,
  641. 0-,
  642. 20
  643. Save File
  644. 1-
  645. 21
  646. Save All
  647. 2-
  648. 22
  649. Load New
  650. 3-
  651. 23
  652. Close File
  653. 4-
  654. 24
  655. Import
  656. 5-
  657. 25
  658. Export
  659. 6-
  660. 26
  661. Rename
  662. 7-
  663. 27
  664. DOS Shell
  665. 8-
  666. 28
  667. Quit
  668. =-
  669. 18
  670. Definable Index
  671. =?
  672. 1
  673. INDEX
  674. *-2x=9,,
  675. SAVE FILE
  676. The Save File command (F2, by default) will save the current/active
  677. file to disk.  This is an unconditional save (the file is saved each
  678. time whether or not it needs to be saved).
  679. ────────────────────────────────────────────────────────────────────
  680. Whenever a file is changed and is unsaved the status bar will show
  681. an '*' instead of a '·' after the "Buf:" field.
  682. ────────────────────────────────────────────────────────────────────
  683. /.,
  684. 3-,
  685. 19
  686. File Menu
  687. 39
  688. 18
  689. Definable Index
  690. 3K
  691. 1
  692. INDEX
  693. *-2x=9,,
  694. SAVE ALL
  695. The Save All command (ALT-F2, by default) will save all changed
  696. files to disk.  This is a conditional save (the file is only saved
  697. if it has changed since the last time it was saved).
  698. ────────────────────────────────────────────────────────────────────
  699. Whenever a file is changed and is unsaved the status bar will show
  700. an '*' instead of a '·' after the "Buf:" field.
  701. ────────────────────────────────────────────────────────────────────
  702. /.,
  703. 3-,
  704. 19
  705. File Menu
  706. 39
  707. 18
  708. Definable Index
  709. 3K
  710. 1
  711. INDEX
  712. *-2x<9,,
  713. LOAD NEW
  714. The Load New command (F3, by default) will display a list of files
  715. and allow you select the desired one to load.  Once selected SEDIT
  716. will automatically open a new window and display the file in it.
  717. If there is insufficient memory to load the file or all 4 windows
  718. are in use, SEDIT will abort the operation.
  719. ────────────────────────────────────────────────────────────────────
  720. /.,
  721. 2-,
  722. 19
  723. File Menu
  724. 29
  725. 18
  726. Definable Index
  727. 2K
  728. 1
  729. INDEX
  730. *-3x<9,,
  731. CLOSE FILE
  732. The Close File command (ALT-F3, by default) will close the active
  733. file.  If the file has been changed since the last time it was
  734. saved, SEDIT will ask you if you want to save the file before
  735. closing it.
  736. ────────────────────────────────────────────────────────────────────
  737. /.,
  738. 1-,
  739. 19
  740. File Menu
  741. 19
  742. 18
  743. Definable Index
  744. 1K
  745. 1
  746. INDEX
  747. *-3x<9,,
  748. IMPORT
  749. The Import command (CTRL-Z, by default) will display a list of files
  750. and allow you to select the desired one to import.  The selected
  751. file will be combined into the active file beginning where the
  752. cursor is located when the command is issued.
  753. ────────────────────────────────────────────────────────────────────
  754. /.,
  755. 1-,
  756. 19
  757. File Menu
  758. 19
  759. 18
  760. Definable Index
  761. 1K
  762. 1
  763. INDEX
  764. *-4x;9,,
  765. EXPORT
  766. The Export command (CTRL-X, by default) allows you to create a text
  767. file containing whatever is marked in the active file.
  768. ────────────────────────────────────────────────────────────────────
  769. //,
  770. /-,
  771. 19
  772. File Menu
  773. /9
  774. 3
  775. Field Editing
  776. /I
  777. 18
  778. Definable Index
  779. /[
  780. 1
  781. INDEX
  782. *-3x;9,,
  783. RENAME
  784. The Rename command (F4, by default) allows you to rename the active
  785. file.  Future saves will use the new name.  Note that this does not
  786. affect files previously saved under the old name.
  787. ────────────────────────────────────────────────────────────────────
  788. //,
  789. 0-,
  790. 19
  791. File Menu
  792. 09
  793. 3
  794. Field Editing
  795. 0I
  796. 18
  797. Definable Index
  798. 0[
  799. 1
  800. INDEX
  801. *-.x@9,,
  802. DOS SHELL
  803. This command (ALT-S, by default) allows you to shell to DOS without
  804. exiting SEDIT.  You can then perform DOS related functions such as
  805. formatting disks, copying files or any other needed activity.  When
  806. you are finished, type EXIT and you will immediately return to SEDIT
  807. exactly where you were when you shelled to DOS.
  808. ────────────────────────────────────────────────────────────────────
  809. If Swapping is turned off, SEDIT is left in conventional memory.
  810. This will limit the amount of free memory while in DOS.  If you get
  811. errors such as 'Program too big to fit in memory' or 'Out of memory'
  812. try turning Swapping on before shelling to DOS.  To change the Swap
  813. setting press (ALT-O) for the Other menu, then press (P) to toggle
  814. the setting.  If you want to make the setting permanent, press (V)
  815. to saVe the settings.
  816. ────────────────────────────────────────────────────────────────────
  817. /0,
  818. :-,
  819. 19
  820. File Menu
  821. :9
  822. 18
  823. Definable Index
  824. :K
  825. 6
  826. Hot-Keys
  827. :V
  828. 81
  829. Swapping
  830. :a
  831. 1
  832. INDEX
  833. *-4x;9,,
  834. QUIT
  835. The Quit command (ALT-X, by default) prompts you to save unsaved
  836. files then exits SEDIT.
  837. ────────────────────────────────────────────────────────────────────
  838. /.,
  839. /-,
  840. 19
  841. File Menu
  842. /9
  843. 18
  844. Definable Index
  845. /K
  846. 1
  847. INDEX
  848. *-,xB9,,
  849. EDIT MENU
  850. The pull-down Edit menu is accessed by pressing (ALT-E, by default).
  851. It provides easy access to many editing functions in SEDIT.  The
  852. following functions are supported via the menu.
  853. ────────────────────────────────────────────────────────────────────
  854.  Restore Line   -  Undo changes to line.
  855.  Erase EOL      -  Erase from cursor position to end-of-line.
  856.  Delete Line    -  Delete current line.
  857.  Undelete Line  -  Resore last deleted line.
  858.  Delete Word    -  Delete word t cursor.
  859.  Insert Line    -  Insert a new line.
  860.  Expand TABs    -  Convert all TAB characters into spaces.
  861.  Control Code   -  Insert control code into text.
  862.  Reformat       -  Reformat current paragraph or quoted text.
  863.  Line Draw      -  Draw lines and boxes using the cursor.
  864. ────────────────────────────────────────────────────────────────────
  865. Functions with a key combination displayed can be directly accessed
  866. via the key combination without using the pull-down menu.
  867. ────────────────────────────────────────────────────────────────────
  868. /6,
  869. 0-,
  870. 30
  871. Restore Line
  872. 1-
  873. 31
  874. Erase EOL
  875. 2-
  876. 32
  877. Delete Line
  878. 3-
  879. 33
  880. Undelete Line
  881. 4-
  882. 37
  883. Delete Word
  884. 5-
  885. 34
  886. Insert Line
  887. 6-
  888. 36
  889. Expand TABs
  890. 7-
  891. 35
  892. Control Code
  893. 8-
  894. 38
  895. Reformat
  896. 9-
  897. 39
  898. Line Draw
  899. >-
  900. 1
  901. INDEX
  902. *-3x<9,,
  903. REST_LINE
  904. The Restore Line command (ALT-U, by default) will undo all the
  905. changes to the active line and restore it to its original state.
  906. This command is only available for the current line.  Once you leave
  907. a line, SEDIT is no longer able to reverse your changes.
  908. ────────────────────────────────────────────────────────────────────
  909. /.,
  910. 1-,
  911. 29
  912. Edit Menu
  913. 19
  914. 18
  915. Definable Index
  916. 1K
  917. 1
  918. INDEX
  919. *-4x;9,,
  920. ERASE EOL
  921. The Erase EOL command (CTRL-E, by default) will delete all
  922. characters from the cursor to the end of the current line
  923. ────────────────────────────────────────────────────────────────────
  924. /.,
  925. /-,
  926. 29
  927. Edit Menu
  928. /9
  929. 18
  930. Definable Index
  931. /K
  932. 1
  933. INDEX
  934. *-3x;9,,
  935. DELETE LINE
  936. The Delete Line command (CTRL-Y, by default) will delete the current
  937. line and place it in the undelete buffer.  You can retrieve a
  938. deleted line with the Undelete Line command.
  939. ────────────────────────────────────────────────────────────────────
  940. /.,
  941. 0-,
  942. 29
  943. Edit Menu
  944. 09
  945. 18
  946. Definable Index
  947. 0K
  948. 1
  949. INDEX
  950. *-3x<9,,
  951. UNDELETE LINE
  952. The Undelete Line command (CTRL-U, by default) will undelete the
  953. last line deleted or the last line placed in the undelete buffer.
  954. Lines are placed in the undelete buffer with the Delete Line, Delete
  955. Block or To Clipboard commands.
  956. ────────────────────────────────────────────────────────────────────
  957. /.,
  958. 1-,
  959. 29
  960. Edit Menu
  961. 19
  962. 18
  963. Definable Index
  964. 1K
  965. 1
  966. INDEX
  967. *-4x;9,,
  968. INSERT LINE
  969. The Insert Line command (CTRL-N, by default) will insert a blank
  970. line directly above the cursor.
  971. ────────────────────────────────────────────────────────────────────
  972. /.,
  973. /-,
  974. 29
  975. Edit Menu
  976. /9
  977. 18
  978. Definable Index
  979. /K
  980. 1
  981. INDEX
  982. *-3x<9,,
  983. CONTROL CODE
  984. The Control Code command (CTRL-O, by default) allows you to enter
  985. control codes directly into the file you are editing.  The control
  986. code is the ASCII value associated with the particular character you
  987. want to enter.
  988. ────────────────────────────────────────────────────────────────────
  989. //,
  990. 1-,
  991. 92
  992. ASCII Chart
  993. 1;
  994. 29
  995. Edit Menu
  996. 1G
  997. 18
  998. Definable Index
  999. 1Y
  1000. 1
  1001. INDEX
  1002. *-3x;9,,
  1003. EXPAND TAB
  1004. The Expand TABs command (SHIFT-TAB, by default) will convert all TAB
  1005. characters into the proper number of spaces.  The number of spaces
  1006. is set with the Tab Size command.
  1007. ────────────────────────────────────────────────────────────────────
  1008. /.,
  1009. 0-,
  1010. 29
  1011. Edit Menu
  1012. 09
  1013. 18
  1014. Definable Index
  1015. 0K
  1016. 1
  1017. INDEX
  1018. *-2x<9,,
  1019. DELETE WORD
  1020. The Delete Word command (CTRL-T, by default) will delete one word
  1021. (consisting of alpha-numeric characters) at the cursor and any
  1022. trailing spaces.  If the cursor in on a non-alpha-numeric character,
  1023. then SEDIT will delete charaters until the next alpha-numeric
  1024. character is reached.
  1025. ────────────────────────────────────────────────────────────────────
  1026. /.,
  1027. 2-,
  1028. 29
  1029. Edit Menu
  1030. 29
  1031. 18
  1032. Definable Index
  1033. 2K
  1034. 1
  1035. INDEX
  1036. *--xB9,,
  1037. REFORMAT PARAGRAPH OR QUOTED TEXT
  1038. The Reformat command (CTRL-CR, by default) reformats the current
  1039. paragraph from the cursor position to the paragraph's end.  This is
  1040. accomplished by wrapping lines longer than the Wordwrap length to
  1041. the next line.  Indention is preserved during the reformation.
  1042. ────────────────────────────────────────────────────────────────────
  1043. The Reformat Quote command (CTRL-\, by default) reformats quoted
  1044. text from the cursor position to the last quoted line.  This is
  1045. accomplished by wrapping lines longer than the Wordwrap length to
  1046. the next line while leaving the quote characters in place.  The
  1047. number of quote characters is determined by the cursor position when
  1048. the command is issued.  If the starting column position is greater
  1049. than eight or the character preceding the cursor is alpha-numeric,
  1050. you are asked to confirm the command.
  1051. ────────────────────────────────────────────────────────────────────
  1052.     JS> To reformat this quote place the cursor on the letter
  1053.     JS> "T" in the word "To" on the first line and press (CTRL-\).
  1054. ────────────────────────────────────────────────────────────────────
  1055. /.,
  1056. =-,
  1057. 29
  1058. Edit Menu
  1059. =9
  1060. 18
  1061. Definable Index
  1062. =K
  1063. 1
  1064. INDEX
  1065. *-0x>9,,
  1066. LINE DRAW
  1067. The Line Draw command (ALT--, by default) allows you to select a
  1068. drawing mode.  Once a mode is selected SEDIT will draw lines and
  1069. boxes simply by moving the cursor.  The following modes are valid:
  1070. ────────────────────────────────────────────────────────────────────
  1071. Off - No lines are drawn, normal edit mode.
  1072.  ┌────────┐  ╔════════╗  ╒═══════════════════╕  ╓─────────────────╖
  1073.  │ Single │  ║ Double ║  │ Double Horizontal │  ║ Double Vertical ║
  1074.  └────────┘  ╚════════╝  ╘═══════════════════╛  ╙─────────────────╜
  1075. Erase - Characters and lines are erased as the cursor is moved.
  1076. ────────────────────────────────────────────────────────────────────
  1077. /.,
  1078. 6-,
  1079. 29
  1080. Edit Menu
  1081. 69
  1082. 18
  1083. Definable Index
  1084. 6K
  1085. 1
  1086. INDEX
  1087. *-/x?9,,
  1088. WINDOW MENU
  1089. The pull-down Window menu is accessed by pressing (ALT-W, by
  1090. default). It provides easy access to multi-file windowing functions
  1091. in SEDIT.  The following functions are supported via the menu.
  1092. ────────────────────────────────────────────────────────────────────
  1093.  Zoom/unzoom   -  Toggle to/from full screen presentation.
  1094.  Next Window   -  Jump to the net window.
  1095.  Toggle Split  -  Toggle horizontal/vertical split of windows.
  1096.  Resize        -  Enlarge or shrink active window.
  1097. ────────────────────────────────────────────────────────────────────
  1098. Functions with a key combination displayed can be directly accessed
  1099. via the key combination without using the pull-down menu.
  1100. ────────────────────────────────────────────────────────────────────
  1101. /0,
  1102. 0-,
  1103. 41
  1104. Zoom/unzoom
  1105. 1-
  1106. 42
  1107. Next Window
  1108. 2-
  1109. 43
  1110. Toggle Split
  1111. 3-
  1112. 44
  1113. Resize
  1114. 8-
  1115. 1
  1116. INDEX
  1117. *-3x<9,,
  1118. ZOOM/UNZOOM WINDOW
  1119. The Zoom/Unzoom command (F5, by default) expands the window to
  1120. occupy the full screen (Zoom) or returns it to its normal size
  1121. (Unzoom), depending on its current state.  When a window is not
  1122. Zoomed it will have a border around it.
  1123. ────────────────────────────────────────────────────────────────────
  1124. /.,
  1125. 1-,
  1126. 40
  1127. Window Menu
  1128. 1;
  1129. 18
  1130. Definable Index
  1131. 1M
  1132. 1
  1133. INDEX
  1134. *-/x?9,,
  1135. NEXT WINDOW
  1136. The Next Window command (F6, by default) makes the next valid
  1137. window/file in the que the active window/file.  If no valid
  1138. windows/files are found before the end of the que, SEDIT will search
  1139. from the beginning of the que up to the current window/file.
  1140. ────────────────────────────────────────────────────────────────────
  1141. (ALT-1 thru ALT-4) will allow you to jump directly to any valid
  1142. window/file without having to cycle through all the other
  1143. windows/files.  For example, if you are editing 4 files at once and
  1144. the active file is #3 (see the bottom right hand corner of the
  1145. status bar) and you want to go to the 2nd window/file, simply press
  1146. (ALT-2).
  1147. ────────────────────────────────────────────────────────────────────
  1148. /.,
  1149. 8-,
  1150. 40
  1151. Window Menu
  1152. 8;
  1153. 18
  1154. Definable Index
  1155. 8M
  1156. 1
  1157. INDEX
  1158. *-3x<9,,
  1159. TOGGLE SPLIT
  1160. The Toggle Split command (F7, by default) toggles how multiple
  1161. files/windows are displayed.  They are displayed either horizontally
  1162. (on top of each other from top to bottom) or vertically (next to
  1163. each other from left to right).
  1164. ────────────────────────────────────────────────────────────────────
  1165. /.,
  1166. 1-,
  1167. 40
  1168. Window Menu
  1169. 1;
  1170. 18
  1171. Definable Index
  1172. 1M
  1173. 1
  1174. INDEX
  1175. *-1x=9,,
  1176. RESIZE WINDOW
  1177. The Resize Window command (CTRL-F5, by default) allows you to change
  1178. the size of the active window when multiple windows are displayed.
  1179. ────────────────────────────────────────────────────────────────────
  1180. The windows are resized by moving the bottom border up or down for
  1181. horizontally displayed windows, and the right border left or right
  1182. for vertically displayed windows.  Note the adjoining window must
  1183. have sufficient room to be expanded into.
  1184. ────────────────────────────────────────────────────────────────────
  1185. /.,
  1186. 4-,
  1187. 40
  1188. Window Menu
  1189. 4;
  1190. 18
  1191. Definable Index
  1192. 4M
  1193. 1
  1194. INDEX
  1195. *-/x?9,,
  1196. LOCATE MENU
  1197. The pull-down Locate menu is accessed by pressing (ALT-L, by
  1198. default). It provides easy access to search and replace functions in
  1199. SEDIT.  The following functions are supported via the menu.
  1200. ────────────────────────────────────────────────────────────────────
  1201.  Find          -  Find specified string.
  1202.  Replace       -  Find specified string and replace with another.
  1203.  Next Match    -  Find next match of previously specified string.
  1204.  Goto Line     -  Goto a specified line number.
  1205. ────────────────────────────────────────────────────────────────────
  1206. Functions with a key combination displayed can be directly accessed
  1207. via the key combination without using the pull-down menu.
  1208. ────────────────────────────────────────────────────────────────────
  1209. /0,
  1210. 0-,
  1211. 46
  1212. Find
  1213. 1-
  1214. 47
  1215. Replace
  1216. 2-
  1217. 48
  1218. Next Match
  1219. 3-
  1220. 49
  1221. Goto Line
  1222. 8-
  1223. 1
  1224. INDEX
  1225. *-.xA9,,
  1226. FIND STRING
  1227. The Find command (CTRL-F, by default) allows you to search for a
  1228. specific string as defined in the "Search For:" field.
  1229. ────────────────────────────────────────────────────────────────────
  1230. "Ignore Case" when toggled to "No" will only find a match if the
  1231. case is the same.  For example, "sedit", "Sedit", "SEDIT" are
  1232. considered different strings when this field is set to "No", but
  1233. are considered the same string when this field is set to "Yes".
  1234. ────────────────────────────────────────────────────────────────────
  1235. "Range:" determines the scope of the search.  "From Cursor" begins
  1236. the search at the cursor and continues to the end of the file.
  1237. "From Beginning" searches the entire file.  "Marked Block" limits
  1238. the search to highlighted block.
  1239. ────────────────────────────────────────────────────────────────────
  1240. (SPACEBAR) to toggle options.  (TAB) to begin a search.  (ESC) Quit.
  1241. ────────────────────────────────────────────────────────────────────
  1242. //,
  1243. ;-,
  1244. 45
  1245. Locate Menu
  1246. ;;
  1247. 3
  1248. Field Editing
  1249. ;K
  1250. 18
  1251. Definable Index
  1252. ;]
  1253. 1
  1254. INDEX
  1255. *-,xB9,,
  1256. SEARCH & REPLACE
  1257. The Replace command (CTRL-R, by default) searchs for the string
  1258. defined in "Search For:" and replaces it with "Replace With:".
  1259. ────────────────────────────────────────────────────────────────────
  1260. "Ignore Case" when toggled to "No" will only find a match if the
  1261. case is the same.  For example, "sedit", "Sedit", "SEDIT" are
  1262. considered different strings when this field is set to "No", but
  1263. are considered the same string when this field is set to "Yes".
  1264. ────────────────────────────────────────────────────────────────────
  1265. "Range:" determines the scope of the search.  "From Cursor" begins
  1266. the search at the cursor and continues to the end of the file.
  1267. "From Beginning" searches the entire file.  "Marked Block" limits
  1268. the search to highlighted block.
  1269. ────────────────────────────────────────────────────────────────────
  1270. If the "Prompt:" option is set to "No", then all matches are
  1271. automatically changed, else you are prompted before each change.
  1272. ────────────────────────────────────────────────────────────────────
  1273. (SPACEBAR) to toggle options.  (TAB) to begin a search.  (ESC) Quit.
  1274. ────────────────────────────────────────────────────────────────────
  1275. //,
  1276. >-,
  1277. 45
  1278. Locate Menu
  1279. >;
  1280. 3
  1281. Field Editing
  1282. >K
  1283. 18
  1284. Definable Index
  1285. >]
  1286. 1
  1287. INDEX
  1288. *-4x;9,,
  1289. NEXT MATCH
  1290. The Next Match command (CTRL-L, by default) continues a previously
  1291. defined search.  If no more matches are found a beep will sound.
  1292. ────────────────────────────────────────────────────────────────────
  1293. /.,
  1294. /-,
  1295. 45
  1296. Locate Menu
  1297. /;
  1298. 18
  1299. Definable Index
  1300. /M
  1301. 1
  1302. INDEX
  1303. *-4x;9,,
  1304. GOTO LINE
  1305. The Goto Line command (CTRL-G, by default) allows you to jump
  1306. directly to the specified line.
  1307. ────────────────────────────────────────────────────────────────────
  1308. /.,
  1309. /-,
  1310. 45
  1311. Locate Menu
  1312. /;
  1313. 18
  1314. Definable Index
  1315. /M
  1316. 1
  1317. INDEX
  1318. *-,xB9,,
  1319. BLOCK MENU
  1320. The pull-down Block menu is accessed by pressing (ALT-B, by
  1321. default).  It provides access to most of the block related functions
  1322. in SEDIT.  The following functions are supported via the menu.
  1323. ────────────────────────────────────────────────────────────────────
  1324.  Mark Beg.     -  Begin marking block.
  1325.  Reset Beg.    -  Reset the beginning of a marked block.
  1326.  Mark End      -  Define the end of a marked block.
  1327.  Copy          -  Copy marked block.
  1328.  Move          -  Move marked block.
  1329.  Delete        -  Delete marked block.
  1330.  Goto Beg.     -  Move cursor to beginning of marked block.
  1331.  Hide/unhide   -  Hide/unhide marked block.
  1332.  To Clipboard  -  Copy marked block to clipboard.
  1333.  From Clipbd.  -  Get text from clipboard.
  1334. ────────────────────────────────────────────────────────────────────
  1335. Functions with a key combination displayed can be directly accessed
  1336. via the key combination without using the pull-down menu.
  1337. ────────────────────────────────────────────────────────────────────
  1338. /6,
  1339. 0-,
  1340. 51
  1341. Mark Beg.
  1342. 1-
  1343. 52
  1344. Reset Beg.
  1345. 2-
  1346. 53
  1347. Mark End
  1348. 3-
  1349. 54
  1350. Copy
  1351. 4-
  1352. 55
  1353. Move
  1354. 5-
  1355. 56
  1356. Delete
  1357. 6-
  1358. 57
  1359. Goto Beg.
  1360. 7-
  1361. 59
  1362. Hide/unhide
  1363. 8-
  1364. 59
  1365. To Clipboard
  1366. 9-
  1367. 60
  1368. From Clipbd.
  1369. >-
  1370. 1
  1371. INDEX
  1372. *-2x<9,,
  1373. MARK BEGINNING OF BLOCK
  1374. The Mark Beg. command (F9, by default) sets the current cursor
  1375. position as the beginning and end of the block.  Until the Mark End
  1376. command is issued, the end of the block follows the current cursor
  1377. position.  This allows you to define the block by simply moving the
  1378. cursor to where you want the block to end.
  1379. ────────────────────────────────────────────────────────────────────
  1380. /.,
  1381. 2-,
  1382. 50
  1383. Block Menu
  1384. 2:
  1385. 18
  1386. Definable Index
  1387. 2L
  1388. 1
  1389. INDEX
  1390. *-3x<9,,
  1391. RESET BEGINNING OF BLOCK
  1392. The Reset Beg. command (ALT-F9, by default) resets the block's
  1393. beginning to the current cursor position.  This command allows you
  1394. to change the beginning of a marked block.  Unlike the Mark Beg.
  1395. command the end-of-block marker is not affected.
  1396. ────────────────────────────────────────────────────────────────────
  1397. /.,
  1398. 1-,
  1399. 50
  1400. Block Menu
  1401. 1:
  1402. 18
  1403. Definable Index
  1404. 1L
  1405. 1
  1406. INDEX
  1407. *-3x;9,,
  1408. MARK END BLOCK
  1409. The Mark End command (F10, by default) sets the block's end to the
  1410. current cursor position.  After issuing a Mark End command the block
  1411. end setting will no longer follow the current cursor position.
  1412. ────────────────────────────────────────────────────────────────────
  1413. /.,
  1414. 0-,
  1415. 50
  1416. Block Menu
  1417. 0:
  1418. 18
  1419. Definable Index
  1420. 0L
  1421. 1
  1422. INDEX
  1423. *-3x;9,,
  1424. COPY BLOCK
  1425. The Copy command (ALT-C, by default) copies the marked block to the
  1426. current cursor postition.  The copied block is inserted and does not
  1427. overwrite existing text.
  1428. ────────────────────────────────────────────────────────────────────
  1429. /.,
  1430. 0-,
  1431. 50
  1432. Block Menu
  1433. 0:
  1434. 18
  1435. Definable Index
  1436. 0L
  1437. 1
  1438. INDEX
  1439. *-3x;9,,
  1440. MOVE BLOCK
  1441. The Move command (ALT-V, by default) copies the marked block to the
  1442. current cursor postition, and then deletes the original block.  The
  1443. moved block is inserted and does not overwrite existing text.
  1444. ────────────────────────────────────────────────────────────────────
  1445. /.,
  1446. 0-,
  1447. 50
  1448. Block Menu
  1449. 0:
  1450. 18
  1451. Definable Index
  1452. 0L
  1453. 1
  1454. INDEX
  1455. *-3x;9,,
  1456. DELETE BLOCK
  1457. The Delete Block command (ALT-Y, by default) removes the marked
  1458. block from the document and places it in the undelete buffer.  It
  1459. can be recovered 1 line at a time with the Undelete Line command.
  1460. ────────────────────────────────────────────────────────────────────
  1461. /.,
  1462. 0-,
  1463. 50
  1464. Block Menu
  1465. 0:
  1466. 18
  1467. Definable Index
  1468. 0L
  1469. 1
  1470. INDEX
  1471. *-4x;9,,
  1472. GOTO BEGINNING OF BLOCK
  1473. The Goto Beg. command (CTRL-F9, by default) moves the cursor
  1474. position to the beginning of the marked block.
  1475. ────────────────────────────────────────────────────────────────────
  1476. /.,
  1477. /-,
  1478. 50
  1479. Block Menu
  1480. /:
  1481. 18
  1482. Definable Index
  1483. /L
  1484. 1
  1485. INDEX
  1486. *-3x<9,,
  1487. HIDE/UNHIDE BLOCK
  1488. The Hide/unhide command (ALT-F10, by default) hides or unhides the
  1489. marked block, depending the the blocks current state.  The block is
  1490. hidden by changing its highlighted color to the default text color.
  1491. It is unhidden by resetting its color to the highlighted color.
  1492. ────────────────────────────────────────────────────────────────────
  1493. /.,
  1494. 1-,
  1495. 50
  1496. Block Menu
  1497. 1:
  1498. 18
  1499. Definable Index
  1500. 1L
  1501. 1
  1502. INDEX
  1503. *-3x<9,,
  1504. TO CLIPBOARD
  1505. The To Clipboard command (ALT-D, by default) copies the highlighted/
  1506. marked text to the undelete buffer.  It can be retrieved using the
  1507. From Clipboard command.  This command, along with the From Clipboard
  1508. command, is used to move text from one file to another.
  1509. ────────────────────────────────────────────────────────────────────
  1510. /.,
  1511. 1-,
  1512. 50
  1513. Block Menu
  1514. 1:
  1515. 18
  1516. Definable Index
  1517. 1L
  1518. 1
  1519. INDEX
  1520. *-3x<9,,
  1521. FROM CLIPBOARD
  1522. The From Clipboard command (ALT-G, by default) copies a previously
  1523. saved block of text from the undelete buffer.  Text can be saved
  1524. using the To Clipboard command.  This command, along with the To
  1525. Clipboard command, is used to move text from one file to another.
  1526. ────────────────────────────────────────────────────────────────────
  1527. /.,
  1528. 1-,
  1529. 50
  1530. Block Menu
  1531. 1:
  1532. 18
  1533. Definable Index
  1534. 1L
  1535. 1
  1536. INDEX
  1537. *-.x@9,,
  1538. PRT MENU
  1539. The pull-down Prt menu is accessed by pressing (ALT-R, by default).
  1540. It provides access to the print functions in SEDIT.  The following
  1541. functions are supported via the menu.
  1542. ────────────────────────────────────────────────────────────────────
  1543.  Print Block  -  Print only the marked block.
  1544.  Print All    -  Print entire file.
  1545.  Form Feed    -  Send form-feed to printer.
  1546.  Left Margin  -  The number of spaces to indent when printing.
  1547.  Lines/page   -  THe number of printed lines per page.
  1548.  Page Break   -  Enter a hard page break (decimal char code 012).
  1549. ────────────────────────────────────────────────────────────────────
  1550. Functions with a key combination displayed can be directly accessed
  1551. via the key combination without using the pull-down menu.
  1552. ────────────────────────────────────────────────────────────────────
  1553. /2,
  1554. 0-,
  1555. 62
  1556. Print Block
  1557. 1-
  1558. 63
  1559. Print All
  1560. 2-
  1561. 64
  1562. Form Feed
  1563. 3-
  1564. 65
  1565. Left Margin
  1566. 4-
  1567. 66
  1568. Lines/page
  1569. 5-
  1570. 67
  1571. Page Break
  1572. :-
  1573. 1
  1574. INDEX
  1575. *-4x;9,,
  1576. PRINT BLOCK
  1577. The Print Block command (CTRL-B, by default) sends the marked block
  1578. to the printer (lpt1).  A form feed is not sent after the block.
  1579. ────────────────────────────────────────────────────────────────────
  1580. /.,
  1581. /-,
  1582. 61
  1583. Print Menu
  1584. /:
  1585. 18
  1586. Definable Index
  1587. /L
  1588. 1
  1589. INDEX
  1590. *-4x;9,,
  1591. PRINT ALL
  1592. The Print All command (CTRL-D, by default) sends the entire active
  1593. file to the printer (lpt1).  A form feed is not sent after the file.
  1594. ────────────────────────────────────────────────────────────────────
  1595. /.,
  1596. /-,
  1597. 61
  1598. Print Menu
  1599. /:
  1600. 18
  1601. Definable Index
  1602. /L
  1603. 1
  1604. INDEX
  1605. *-3x<9,,
  1606. FORM FEED
  1607. The Form Feed command (which is only accessible via the menus) sends
  1608. sends a form feed to the printer (lpt1).  A form feed is often
  1609. needed after printing a block or file to instruct the printer to
  1610. eject the last page.
  1611. ────────────────────────────────────────────────────────────────────
  1612. /.,
  1613. 1-,
  1614. 61
  1615. Print Menu
  1616. 1:
  1617. 18
  1618. Definable Index
  1619. 1L
  1620. 1
  1621. INDEX
  1622. *-3x;9,,
  1623. LEFT MARGIN
  1624. The Left Margin command (ALT-I, by default) allows you to define the
  1625. number of spaces each line is indented when the file or a block is
  1626. sent to a text printer.
  1627. ────────────────────────────────────────────────────────────────────
  1628. /.,
  1629. 0-,
  1630. 61
  1631. Print Menu
  1632. 0:
  1633. 18
  1634. Definable Index
  1635. 0L
  1636. 1
  1637. INDEX
  1638. *-4x;9,,
  1639. LINES PER PRINTED PAGE
  1640. The Lines/page command (ALT-H, by default) allows you to define the
  1641. number of lines printed on each page.
  1642. ────────────────────────────────────────────────────────────────────
  1643. //,
  1644. /-,
  1645. 61
  1646. Print Menu
  1647. /:
  1648. 3
  1649. Field Editing
  1650. /J
  1651. 18
  1652. Definable Index
  1653. /\
  1654. 1
  1655. INDEX
  1656. *-3x;9,,
  1657. PAGE BREAK
  1658. The Page Break command (CTRL-P, by default) allows you to force a
  1659. page break when printing by inserting a form feed character directly
  1660. into the text.
  1661. ────────────────────────────────────────────────────────────────────
  1662. /.,
  1663. 0-,
  1664. 61
  1665. Print Menu
  1666. 0:
  1667. 18
  1668. Definable Index
  1669. 0L
  1670. 1
  1671. INDEX
  1672. *-0x>9,,
  1673. MACRO MENU
  1674. The pull-down Macro menu is accessed by pressing (CTRL-C, by
  1675. default).  It provides access to the macro functions in SEDIT.  The
  1676. following functions are supported via the menu.
  1677. ────────────────────────────────────────────────────────────────────
  1678.  Record Macro   -  Begin/end recording session.
  1679.  Execute Macro  -  Execute previously recorded macro.
  1680. ────────────────────────────────────────────────────────────────────
  1681. Functions with a key combination displayed can be directly accessed
  1682. via the key combination without using the pull-down menu.
  1683. ────────────────────────────────────────────────────────────────────
  1684. /.,
  1685. 0-,
  1686. 69
  1687. Record Macro
  1688. 1-
  1689. 70
  1690. Execute Macro
  1691. 6-
  1692. 1
  1693. INDEX
  1694. *-.x@9,,
  1695. RECORD MACRO
  1696. The Record Macro command (CTRL-], by default) allows you to
  1697. assign a predefined sequence of keystrokes to a single keystroke.
  1698. ────────────────────────────────────────────────────────────────────
  1699. When the Record Macro command is issued, you are asked to select
  1700. a key you want to assign the keystrokes to.  Then you are asked to
  1701. enter a short description of the macro.  The description will appear
  1702. in the maCro menu.  Once the description is entered, a beep will
  1703. sound to let you know the recording has begun.  Enter the key
  1704. sequence as you normally would.  When finished, press the Record
  1705. Macro command once again.  A series of beeps will acknowledge that
  1706. the key sequence was saved.
  1707. ────────────────────────────────────────────────────────────────────
  1708. SEDIT allows up to 10 macros with each storing up to 250 keystrokes.
  1709. ────────────────────────────────────────────────────────────────────
  1710. /.,
  1711. :-,
  1712. 68
  1713. Macro Menu
  1714. ::
  1715. 18
  1716. Definable Index
  1717. :L
  1718. 1
  1719. INDEX
  1720. *-2x<9,,
  1721. EXECUTE MACRO
  1722. The Execute Macro commands (SHIFT-F1 thru SHIFT-F10, by default)
  1723. allows you execute a previously defined macro.  To replay the
  1724. sequence of keystrokes, press the key to which they were assigned.
  1725. ────────────────────────────────────────────────────────────────────
  1726. SEDIT allows up to 10 macros with each storing up to 250 keystrokes.
  1727. ────────────────────────────────────────────────────────────────────
  1728. /.,
  1729. 2-,
  1730. 68
  1731. Macro Menu
  1732. 2:
  1733. 18
  1734. Definable Index
  1735. 2L
  1736. 1
  1737. INDEX
  1738. *-0x?9,,
  1739. SPELL MENU
  1740. The pull-down Spell menu is accessed by pressing (ALT-P, by
  1741. default).  It provides easy access to the spell check functions in
  1742. SEDIT.  The following functions are supported via the menu.
  1743. ────────────────────────────────────────────────────────────────────
  1744.  Check To EOF  -  Spell Check from current position to end of file.
  1745.  Check Word    -  Check word at cursor.
  1746.  Spell Check   -  Toggle automatic spell checking On or Off.
  1747. ────────────────────────────────────────────────────────────────────
  1748. Functions with a key combination displayed can be directly accessed
  1749. via the key combination without using the pull-down menu.
  1750. ────────────────────────────────────────────────────────────────────
  1751. //,
  1752. 0-,
  1753. 72
  1754. Check To EOF
  1755. 1-
  1756. 73
  1757. Check Word
  1758. 2-
  1759. 74
  1760. Spell Check
  1761. 7-
  1762. 1
  1763. INDEX
  1764. *-3x;9,,
  1765. CHECK TO EOF
  1766. The Check To EOF command (CTRL-A, by default) checks the spelling of
  1767. the current file, beginning where the cursor is positioned to the
  1768. file's end.  To terminate the spell check, press (ESC).
  1769. ────────────────────────────────────────────────────────────────────
  1770. /.,
  1771. 0-,
  1772. 71
  1773. Spell Menu
  1774. 0:
  1775. 18
  1776. Definable Index
  1777. 0L
  1778. 1
  1779. INDEX
  1780. *-3x<9,,
  1781. CHECK WORD
  1782. The Check Word command (ALT-A, by default) checks the spelling of
  1783. the word at the cursor.  If the word is found in the dictionary, a
  1784. distinctive tone will sound, otherwise a list of similar words is
  1785. provided for you to select the correct spelling.
  1786. ────────────────────────────────────────────────────────────────────
  1787. /.,
  1788. 1-,
  1789. 71
  1790. Spell Menu
  1791. 1:
  1792. 18
  1793. Definable Index
  1794. 1L
  1795. 1
  1796. INDEX
  1797. *-2x<9,,
  1798. AUTO SPELL CHECK
  1799. The Spell Check command (which is only accessible via the menus)
  1800. toggles the auto checking On or Off.  If the auto checking is On,
  1801. the words are checked as you type them in.  A beep sounds if SEDIT
  1802. cannot find the word in the dictionary.  You may then either
  1803. continue typing or look the word up with the Check Word command.
  1804. ────────────────────────────────────────────────────────────────────
  1805. /.,
  1806. 2-,
  1807. 71
  1808. Spell Menu
  1809. 2:
  1810. 18
  1811. Definable Index
  1812. 2L
  1813. 1
  1814. INDEX
  1815. *-,xB9,,
  1816. OTHER MENU
  1817. The pull-down Other menu is accessed by pressing (ALT-O, by
  1818. default).  It provides access to several general functions in SEDIT.
  1819. The following functions are supported via the menu.
  1820. ────────────────────────────────────────────────────────────────────
  1821.  Help           -  Online, context sensitive, hyper-text help.
  1822.  Autoindent     -  Indent same as previous line.
  1823.  Strip Spaces   -  Strip blank spaces at the end of a line.
  1824.  Insert         -  Toggle insert/over-write mode.
  1825.  Word Wrap      -  Wrap to next line when right margin is reached.
  1826.  TAB Size       -  Set number of spaces represented by TAB key.
  1827.  Swapping       -  Swap SEDIT out of memory before running program.
  1828.  DOS Command    -  Execute DOS command from within SEDIT.
  1829.  Memory         -  Display free memory, system time,etc.
  1830.  Save Settings  -  Save custom settings to active .CFG file.
  1831. ────────────────────────────────────────────────────────────────────
  1832. Functions with a key combination displayed can be directly accessed
  1833. via the key combination without using the pull-down menu.
  1834. ────────────────────────────────────────────────────────────────────
  1835. /6,
  1836. 0-,
  1837. 2
  1838. Help
  1839. 1-,
  1840. 76
  1841. Autoindent
  1842. 2-
  1843. 77
  1844. Strip Spaces
  1845. 3-
  1846. 78
  1847. Insert
  1848. 4-
  1849. 79
  1850. Word Wrap
  1851. 5-
  1852. 80
  1853. TAB Size
  1854. 6-
  1855. 81
  1856. Swapping
  1857. 7-
  1858. 82
  1859. DOS Command
  1860. 8-
  1861. 83
  1862. Memory
  1863. 9-
  1864. 84
  1865. Save Settings
  1866. >-
  1867. 1
  1868. INDEX
  1869. *-3x<9,,
  1870. AUTOINDENT
  1871. The Autoindent command (which is only accessible via the menus)
  1872. toggles the auto indenting On or Off.  If the auto indenting is On,
  1873. the next line indents the same number of spaces as the previous line
  1874. when (ENTER) is pressed or word wrap occurs.
  1875. ────────────────────────────────────────────────────────────────────
  1876. /.,
  1877. 1-,
  1878. 75
  1879. Other Menu
  1880. 1:
  1881. 18
  1882. Definable Index
  1883. 1L
  1884. 1
  1885. INDEX
  1886. *-3x<9,,
  1887. STRIP TRAILING SPACES
  1888. The Strip Spaces command (which is only accessible via the menus)
  1889. toggles the stripping of trailing spaces On or Off.  If strip spaces
  1890. is On, any trailing spaces are removed whenever the line is active
  1891. then you move to another line.
  1892. ────────────────────────────────────────────────────────────────────
  1893. /.,
  1894. 1-,
  1895. 75
  1896. Other Menu
  1897. 1:
  1898. 18
  1899. Definable Index
  1900. 1L
  1901. 1
  1902. INDEX
  1903. *-2x=9,,
  1904. INSERT
  1905. The Insert command (the (INS) key, is NOT user-definable) toggles
  1906. between over-write and insert mode.  When in the insert mode
  1907. characters are inserted by pushing trailing text to the right.
  1908. While in the over-write mode characters at the cursor are replaced
  1909. when a new one is entered.  The cursor is three times larger in the
  1910. insert mode than when in the over-write mode.
  1911. ────────────────────────────────────────────────────────────────────
  1912. /.,
  1913. 3-,
  1914. 75
  1915. Other Menu
  1916. 3:
  1917. 18
  1918. Definable Index
  1919. 3L
  1920. 1
  1921. INDEX
  1922. *-0x>9,,
  1923. WORD WRAP
  1924. The Word Wrap command (CTRL-W, by default) allows you to define the
  1925. column in which word wrap will take place.  To disable word wrap set
  1926. set this item to 0.
  1927. ────────────────────────────────────────────────────────────────────
  1928. Word wrap is the process of ensuring a maximum length for each line.
  1929. Text is automatically moved to the next line when a character is
  1930. entered beyond the column defined in this setting.  If a line
  1931. becomes too long as a result of inserting characters at its
  1932. beginning, the line/paragraph is adjusted with the Reformat command.
  1933. ────────────────────────────────────────────────────────────────────
  1934. /.,
  1935. 6-,
  1936. 75
  1937. Other Menu
  1938. 6:
  1939. 18
  1940. Definable Index
  1941. 6L
  1942. 1
  1943. INDEX
  1944. *-3x<9,,
  1945. TAB SIZE
  1946. The Tab Size command (ALT-T, by default) allows you to define the
  1947. width of the TAB stops.  The default setting is eight.  Each time
  1948. (TAB) is pressed the cursor moves to the next TAB stop (e.g. column
  1949. 8, 16, 24, etc).
  1950. ────────────────────────────────────────────────────────────────────
  1951. //,
  1952. 1-,
  1953. 75
  1954. Other Menu
  1955. 1:
  1956. 3
  1957. Field Editing
  1958. 1J
  1959. 18
  1960. Definable Index
  1961. 1\
  1962. 1
  1963. INDEX
  1964. *-.x@9,,
  1965. SWAP SEDIT TO MEMORY OR DISK
  1966. When this option is toggled On, SEDIT is moved out of conventional
  1967. memory before external programs, including DOS shells, are executed.
  1968. This frees more memory for the external program.  SEDIT will attempt
  1969. to swap itself to high memory first.  If there is not enough memory,
  1970. it will attempt to swap itself to disk.  Toggle this option by
  1971. pressing (ENTER).
  1972. ────────────────────────────────────────────────────────────────────
  1973. The advantage to swapping, as stated above, is the increased memory
  1974. capacity afforded the external program.  However, it will take
  1975. longer to execute the program because of the time needed to remove
  1976. SEDIT from conventional memory.  Disk swaps will take longer than
  1977. memory swaps.  Therefore, if your applications will run without
  1978. swapping, it is to your advantage to leave this option toggled Off.
  1979. ────────────────────────────────────────────────────────────────────
  1980. /.,
  1981. :-,
  1982. 75
  1983. Other Menu
  1984. ::
  1985. 18
  1986. Definable Index
  1987. :L
  1988. 1
  1989. INDEX
  1990. *-.xA9,,
  1991. DOS COMMAND
  1992. The DOS Command (F8, by default) allows you to execute a DOS
  1993. command without exiting SEDIT.  You can perform DOS related
  1994. functions such as formatting disks, copying files or any other
  1995. needed activity.  Enter the command in the prompt window just like
  1996. you would from a DOS prompt.   When the operation is finished, you
  1997. are automatically returned to SEDIT.
  1998. ────────────────────────────────────────────────────────────────────
  1999. If Swapping is turned off, SEDIT is left in conventional memory.
  2000. This will limit the amount of free memory while executing the DOS
  2001. command.  If you get errors such as 'Program too big to fit in
  2002. memory' or 'Out of memory' try turning Swapping on before shelling
  2003. to DOS.  To change the Swap setting press (ALT-O) for the Other
  2004. menu, then press (P) to toggle the setting.  If you want to make the
  2005. setting permanent, press (V) to saVe the settings.
  2006. ────────────────────────────────────────────────────────────────────
  2007. //,
  2008. ;-,
  2009. 75
  2010. Other Menu
  2011. ;:
  2012. 3
  2013. Field Editing
  2014. ;J
  2015. 18
  2016. Definable Index
  2017. ;\
  2018. 1
  2019. INDEX
  2020. *-/x@9,,
  2021. SYSTEM INFORMATION
  2022. Key system information is available to you anytime by pressing
  2023. (ALT-M, by default).  The following information is displayed.
  2024. ────────────────────────────────────────────────────────────────────
  2025. NEAR FREE  Amount of free memory on the near heap.  This number is
  2026.            really not useful to you, since you can not control it.
  2027. ────────────────────────────────────────────────────────────────────
  2028.  FAR FREE  Amount of free memory that SEDIT and other programs can
  2029.            use.  When you shell to DOS or SEDIT runs other programs,
  2030.            this is the memory that is used.
  2031. ────────────────────────────────────────────────────────────────────
  2032. NEAR HEAP and FAR HEAP are validity checks for the memory that SEDIT
  2033. uses.   Also displayed is the system time and date.
  2034. ────────────────────────────────────────────────────────────────────
  2035. /.,
  2036. 9-,
  2037. 75
  2038. Other Menu
  2039. 9:
  2040. 18
  2041. Definable Index
  2042. 9L
  2043. 1
  2044. INDEX
  2045. *-.x@9,,
  2046. SAVE SETTINGS
  2047. The Save Settings command (which is only accessible via the menus)
  2048. will save the various settings to the file SE.CFG.
  2049. ────────────────────────────────────────────────────────────────────
  2050. It is possible to alter SEDIT's behavior when performing different
  2051. types of editing jobs, by placing a customized SE.CFG in different
  2052. places where SEDIT is started.  Also you can specify a specific
  2053. configuration file via the command line.  For example:
  2054.  
  2055.   SE /C=D:\EDIT\SE.CFG
  2056.  
  2057. This will start SEDIT and use the configuration file SE.CFG located
  2058. in the D:\EDIT directory.  Command line control options should
  2059. be entered last.  They should never be entered before a file name.
  2060. ────────────────────────────────────────────────────────────────────
  2061. /.,
  2062. :-,
  2063. 75
  2064. Other Menu
  2065. ::
  2066. 18
  2067. Definable Index
  2068. :L
  2069. 1
  2070. INDEX
  2071. *--xB9,,
  2072. SELECT FILE
  2073. This window allows you to select a file from a list of files as
  2074. defined in the Filespec field.  The following keys are vaild:
  2075. ────────────────────────────────────────────────────────────────────
  2076.            (TAB) - Jump between the Filespec and Files field.
  2077.      (SHIFT-TAB) - Jump to Filespec field.
  2078.            (ESC) - Leave window without selecting a file.
  2079.             (F9) - Create/load Filespec. (Filespec field).
  2080.          (ENTER) - Filespec field: Display new file list.
  2081.                       Files field: Select file.
  2082. (CTRL-BACKSPACE) - Delete highlighted file (Files field).
  2083.     (ARROW KEYS) - Move cursor, scroll when necessary (Files field).
  2084.      (PGDN/PGUP) - Next/previous screen (Files field).
  2085.       (HOME/END) - Move cursor to first/last item (Files field).
  2086. ────────────────────────────────────────────────────────────────────
  2087. While in the Files section, the highlighted file's name, size, date
  2088. and time are displayed above the file list.
  2089. ────────────────────────────────────────────────────────────────────
  2090. /-,
  2091. =-,
  2092. 3
  2093. Field Editing
  2094. ==,
  2095. 1
  2096. INDEX
  2097. *-,xB9,,
  2098. SELECT WORD
  2099. The spelling checker was unable to find this word in the dictionary.
  2100. The questionable word is shown as the window's title.  The following
  2101. keys are valid while in this window:
  2102. ────────────────────────────────────────────────────────────────────
  2103. (ENTER) - Select highlighted word as the correct spelling.
  2104.   (F10) - Add word to personal list.
  2105.   (TAB) - Skip the questionable word and continue on.  The word will
  2106.           be automatically skipped each time thereafter.
  2107.   (ESC) - Leave window and terminate spelling check.
  2108. ────────────────────────────────────────────────────────────────────
  2109.           (/) - Move cursor down/up one item.
  2110.     (PGDN/PGUP) - Next/previous screen.
  2111.      (HOME/END) - Move cursor to first/last screen.
  2112. (CTRL-HOME/END) - Move cursor to first/last displayed item.
  2113. ────────────────────────────────────────────────────────────────────
  2114. To search for a specific word, begin typing the word.  Use
  2115. (BACKSPACE) if you enter an incorrect letter.
  2116. ────────────────────────────────────────────────────────────────────
  2117. /,,
  2118. >-,
  2119. 1
  2120. INDEX
  2121. *-1x=9,,
  2122. SEDIT CONFIGURATION PROGRAM
  2123. The program SE-CFG.EXE is used to customize certain SEDIT settings.
  2124. The new settings are stored in the file SE.CFG.  If SEDIT can find
  2125. this file at startup, the settings, as defined in SE.CFG, are used
  2126. instead of the default.
  2127. ────────────────────────────────────────────────────────────────────
  2128. Key Bindings    - Define keystrokes used to execute SEDIT commands.
  2129. Color Selection - Define colors used within SEDIT.
  2130. ────────────────────────────────────────────────────────────────────
  2131. /.,
  2132. 1,,
  2133. 88
  2134. Key Bindings
  2135. 2,
  2136. 89
  2137. Color Selection
  2138. 4-
  2139. 1
  2140. INDEX
  2141. *-.x@9,,
  2142. KEY BINDINGS
  2143. SE-CFG.EXE option (1).  This screen allows you to define the
  2144. keystrokes used to execute SEDIT commands.
  2145. ────────────────────────────────────────────────────────────────────
  2146.    (ARROWS) - Move highlight bar.
  2147. (PGDN/PGUP) - Move down/up five places.
  2148.  (HOME/END) - Move to the first/last item.
  2149.     (SPACE) - Tag active key.  Once tagged it will begin to blink.
  2150.     (ENTER) - Move a tagged (blinking) key to highlighted key.
  2151.        (F2) - Save displayed key bindings in SE.CFG file.
  2152.       (TAB) - Display alternate list.  Use (SPACE) and (ENTER) as
  2153.               defined above to change key bindings.
  2154.     (ALT-X) - Save settings and exit.
  2155.       (ESC) - Exit program, no save.
  2156. ────────────────────────────────────────────────────────────────────
  2157. /-,
  2158. :-,
  2159. 87
  2160. SE-CFG.EXE
  2161. ::
  2162. 1
  2163. INDEX
  2164. *-0x?9,,
  2165. SELECT COLORS
  2166. SE-CFG.EXE option (2).  From this screen you can change the colors
  2167. used by SEDIT.  Use the up () and down () arrows to select which
  2168. item to change.  Use the left () and right () arrows to change the
  2169. color of the highlighted item.  Sample screens are provided to let
  2170. you view your selections.  See below for other valid commands.
  2171. ────────────────────────────────────────────────────────────────────
  2172.     (D) - Toggle through various default settings.
  2173.    (F2) - Save the displayed colors as the default colors.
  2174. (ALT-X) - Save settings and exit.
  2175.   (ESC) - Exit program, no save.
  2176. ────────────────────────────────────────────────────────────────────
  2177. /-,
  2178. 7-,
  2179. 87
  2180. SE-CFG.EXE
  2181. 7:
  2182. 1
  2183. INDEX
  2184. *-0x?9,,
  2185. APPLICATION LIMITS
  2186. SEDIT was not designed as a "do all" or "be everything" editor.
  2187. There are plenty of other editors available for the "power-user".
  2188. Instead SEDIT was designed for small to medium editing tasks such as
  2189. replying to messages using an off-line mail reader, editing batch
  2190. files, writing quick memos, etc.  SEDIT's emphasis is on ease of
  2191. use and user comfort.  As such, SEDIT has the following limitations:
  2192. ────────────────────────────────────────────────────────────────────
  2193.   * 5,000 lines per file maximum.  Additional lines are truncated.
  2194.   * 1,024 column maximum.  Additional columns are truncated.
  2195.   * 4 concurrently opened files.
  2196. ────────────────────────────────────────────────────────────────────
  2197. /-,
  2198. 7-,
  2199. 9
  2200. Welcome
  2201. 77,
  2202. 1
  2203. INDEX
  2204. *,,{D9,,
  2205. BOX ASCII CODES
  2206.   201╔══════════╦══════════╗187          214╓──────────╥──────────╖183
  2207.      ║       203║          ║                ║       210║          ║
  2208.      ║186       ║          ║                ║186       ║          ║
  2209.      ║          ║206       ║                ║          ║215       ║
  2210.   204╠══════════╬══════════╣185          199╟──────────╫──────────╢182
  2211.      ║          ║          ║                ║          ║          ║
  2212.      ║186       ║          ║                ║186       ║          ║
  2213.      ║          ║202       ║                ║          ║208       ║
  2214.   200╚══════════╩══════════╝188          211╙──────────╨──────────╜189
  2215.          205                                    196
  2216.                     205                                    196
  2217.   213╒══════════╤══════════╕184          218┌──────────┬──────────┐191
  2218.      │       209│          │                │       194│          │
  2219.      │179       │          │                │179       │          │
  2220.      │          │216       │                │          │197       │
  2221.   198╞══════════╪══════════╡181          195├──────────┼──────────┤180
  2222.      │          │          │                │          │          │
  2223.      │179       │          │                │179       │          │
  2224.      │          │207       │                │          │193       │
  2225.   212╘══════════╧══════════╛190          192└──────────┴──────────┘217
  2226. /.,
  2227. A-,
  2228. 92
  2229. ASCII Chart
  2230. A;
  2231. 35
  2232. Control Code
  2233. AJ
  2234. 1
  2235. INDEX
  2236. *--xB9,,
  2237. ASCII CHART 1 of 2
  2238.  0   NUL │ 16  DLE │ 32    │ 48 0  │ 64 @  │ 80 P  │ 96 `   │ 112 p
  2239.  1  SOH │ 17  DC1 │ 33 !  │ 49 1  │ 65 A  │ 81 Q  │ 97 a   │ 113 q
  2240.  2  STX │ 18  DC2 │ 34 "  │ 50 2  │ 66 B  │ 82 R  │ 98 b   │ 114 r
  2241.  3  ETX │ 19  DC3 │ 35 #  │ 51 3  │ 67 C  │ 83 S  │ 99 c   │ 115 s
  2242.  4  EOT │ 20  DC4 │ 36 $  │ 52 4  │ 68 D  │ 84 T  │ 100 d  │ 116 t
  2243.  5  ENQ │ 21  NAK │ 37 %  │ 53 5  │ 69 E  │ 85 U  │ 101 e  │ 117 u
  2244.  6  ACK │ 22  SYN │ 38 &  │ 54 6  │ 70 F  │ 86 V  │ 102 f  │ 118 v
  2245.  7  BEL │ 23  ETB │ 39 '  │ 55 7  │ 71 G  │ 87 W  │ 103 g  │ 119 w
  2246.  8  BS  │ 24  CAN │ 40 (  │ 56 8  │ 72 H  │ 88 X  │ 104 h  │ 120 x
  2247.  9      HT  │ 25  EM  │ 41 )  │ 57 9  │ 73 I  │ 89 Y  │ 105 i  │ 121 y
  2248. 10   LF  │ 26   SUB │ 42 *  │ 58 :  │ 74 J  │ 90 Z  │ 106 j  │ 122 z
  2249. 11   VT  │ 27  ESC │ 43 +  │ 59 ;  │ 75 K  │ 91 [  │ 107 k  │ 123 {
  2250. 12   FF  │ 28  FS  │ 44 ,  │ 60 <  │ 76 L  │ 92 \  │ 108 l  │ 124 |
  2251. 13   CR  │ 29  GS  │ 45 -  │ 61 =  │ 77 M  │ 93 ]  │ 109 m  │ 125 }
  2252. 14  SO  │ 30  RS  │ 46 .  │ 62 >  │ 78 N  │ 94 ^  │ 110 n  │ 126 ~
  2253. 15  SI  │ 31  US  │ 47 /  │ 63 ?  │ 79 O  │ 95 _  │ 111 o  │ 127 
  2254. ────────────────────────────────────────────────────────────────────
  2255. //,
  2256. =-,
  2257. 93
  2258. Next
  2259. =4
  2260. 91
  2261. Box Codes
  2262. =@
  2263. 35
  2264. Control Code
  2265. =O
  2266. 1
  2267. INDEX
  2268. *--xB9,,
  2269. ASCII CHART 2 of 2
  2270.   128 Ç  │ 144 É  │ 160 á │ 176 ░ │ 192 └ │ 208 ╨ │ 224 α  │ 240 ≡
  2271.   129 ü  │ 145 æ  │ 161 í │ 177 ▒ │ 193 ┴ │ 209 ╤ │ 225 ß  │ 241 ±
  2272.   130 é  │ 146 Æ  │ 162 ó │ 178 ▓ │ 194 ┬ │ 210 ╥ │ 226 Γ  │ 242 ≥
  2273.   131 â  │ 147 ô  │ 163 ú │ 179 │ │ 195 ├ │ 211 ╙ │ 227 π  │ 243 ≤
  2274.   132 ä  │ 148 ö  │ 164 ñ │ 180 ┤ │ 196 ─ │ 212 ╘ │ 228 Σ  │ 244 ⌠
  2275.   133 à  │ 149 ò  │ 165 Ñ │ 181 ╡ │ 197 ┼ │ 213 ╒ │ 229 σ  │ 245 ⌡
  2276.   134 å  │ 150 û  │ 166 ª │ 182 ╢ │ 198 ╞ │ 214 ╓ │ 230 µ  │ 246 ÷
  2277.   135 ç  │ 151 ù  │ 167 º │ 183 ╖ │ 199 ╟ │ 215 ╫ │ 231 τ  │ 247 ≈
  2278.   136 ê  │ 152 ÿ  │ 168 ¿ │ 184 ╕ │ 200 ╚ │ 216 ╪ │ 232 Φ  │ 248 °
  2279.   137 ë  │ 153 Ö  │ 169 ⌐ │ 185 ╣ │ 201 ╔ │ 217 ┘ │ 233 Θ  │ 249 ∙
  2280.   138 è  │ 154 Ü  │ 170 ¬ │ 186 ║ │ 202 ╩ │ 218 ┌ │ 234 Ω  │ 250 ·
  2281.   139 ï  │ 155 ¢  │ 171 ½ │ 187 ╗ │ 203 ╦ │ 219 █ │ 235 δ  │ 251 √
  2282.   140 î  │ 156 £  │ 172 ¼ │ 188 ╝ │ 204 ╠ │ 220 ▄ │ 236 ∞  │ 252 ⁿ
  2283.   141 ì  │ 157 ¥  │ 173 ¡ │ 189 ╜ │ 205 ═ │ 221 ▌ │ 237 φ  │ 253 ²
  2284.   142 Ä  │ 158 ₧  │ 174 « │ 190 ╛ │ 206 ╬ │ 222 ▐ │ 238 ε  │ 254 ■
  2285.   143 Å  │ 159 ƒ  │ 175 » │ 191 ┐ │ 207 ╧ │ 223 ▀ │ 239 ∩  │ 255
  2286. ────────────────────────────────────────────────────────────────────
  2287. /.,
  2288. =-,
  2289. 92
  2290. Previous
  2291. =8
  2292. 91
  2293. Box Codes
  2294. =D
  2295. 1
  2296. INDEX
  2297. *94l:9,,
  2298. NO HELP
  2299. Sorry, no help is available for this topic.
  2300. /,,
  2301. .-,
  2302. 1
  2303. INDEX
  2304. ~~
  2305.